Keep household rubbish and recycling neatly organised with this 35L dual-bin system designed for a 600mm external-width cabinet. The system combines one 15L bin and one 20L bin, giving you two separate compartments within one concealed kitchen drawer.

The adjustable mounting configuration suits compatible drawer spaces between 500–540mm wide and 423–490mm deep, making it a practical built-in waste solution for modern kitchen cabinetry.

The bins are 230mm high and the system is designed for soft-close operation when installed with compatible Blum TANDEMBOX drawer runners.

• Dual Waste Separation: Separate general household waste and recycling using two individual bins.
• 35L Total Capacity: Includes one 15L bin and one 20L bin.
• Designed for 600mm Cabinets: Created for a standard 600mm external-width kitchen cabinet.
• Adjustable Fit: Adjustable width and depth allow the mounting tray to suit compatible drawer spaces.
• Soft-Close Operation: Designed to operate smoothly with compatible soft-close Blum TANDEMBOX runners.
• Odour-Control Lids: Included lids feature odour filters to help keep concealed waste storage fresher.
• Concealed Storage: Keeps bins hidden inside your kitchen cabinetry instead of taking up floor space.

• Total Capacity: 35L
• Bin Configuration: 1 × 15L + 1 × 20L
• Suitable External Cabinet Width: 600mm
• Adjustable Width: 500–540mm
• Adjustable Depth: 423–490mm
• Bin Height: 230mm
• Soft-close compatible design
• Compatible with suitable Blum TANDEMBOX drawer runners
• Adjustable mounting tray
• Removable bins for easier emptying and cleaning
• Clip-on lids with odour filters
• Dark grey finish

Capacity

• Total Capacity: 35L
• 1 × Bin: 15L
• 1 × Bin: 20L

Suitable Cabinet Size

• External Cabinet Width: 600mm

Adjustable Fit Dimensions

• Width: 500–540mm
• Depth: 423–490mm
• Bin Height: 230mm

Please Measure Before Ordering:
The 600mm measurement refers to the external width of the cabinet. The mounting configuration can be adjusted between 500–540mm wide and 423–490mm deep.

The 230mm measurement refers to the height of the bins and should not be treated as the total installed drawer or cabinet height.

Always measure the clear internal drawer and cabinet space before purchasing. Allow sufficient clearance for the bins, lids, mounting tray, drawer hardware, runners, plumbing and any other obstructions.

• 1 × 15L removable bin
• 1 × 20L removable bin
• 2 × clip-on lids with odour filters
• 1 × adjustable mounting tray

Please Note: Blum TANDEMBOX drawer runners are not included with this product.

• Remove the bins and wash with warm, mild soapy water.
• Allow all components to dry thoroughly before returning them to the drawer.
• Wipe the mounting tray with a soft damp cloth when required.
• Keep the drawer runners and moving components free from crumbs and debris.
• Replace the odour filters when required.
• Avoid abrasive pads, harsh chemicals, bleach and solvent-based cleaners.

This bin system is designed for installation inside a compatible 600mm external-width cabinet.

Before You Begin

• Confirm the cabinet has an external width of 600mm.
• Measure the clear internal width and depth of the drawer or cabinet.
• Confirm the mounting configuration can be adjusted within the 500–540mm width range.
• Confirm the available depth is compatible with the 423–490mm adjustable depth range.
• The bins themselves are 230mm high. Allow additional vertical clearance for lids, the mounting tray, drawer components and runners.
• Check for plumbing, hinges, electrical connections, shelves and other obstructions before installation.

Installation

1. Install compatible Blum TANDEMBOX soft-close runners according to the runner manufacturer's installation instructions.
2. Adjust the bin mounting tray to suit the available internal drawer dimensions.
3. Position and secure the mounting tray on the compatible drawer system.
4. Place the 15L and 20L bins into the mounting tray.
5. Fit the corresponding lids.
6. Fully open and close the drawer several times to confirm smooth movement and correct soft-close operation.

Important: Compatible Blum TANDEMBOX runners are required for installation and are not included. The 230mm measurement is the bin height, not the complete installed system height.

Bins & Hampers Returns Notice

Due to the size and handling requirements of our Bins & Hampers collection, returns requested within 7 days of delivery will incur a 25% restocking fee. After 7 days from the recorded delivery date, these items are no longer eligible for a refund. Please choose carefully before purchasing.